КаталогПневматические двухмембранные насосы Graco SaniForce 2150 оборудованы одним из наилучших, наиболее долговечных воздушных клапанов, работающих без смазки. Надежные мембранные насосы Graco – идеальное решение для приложений, требующих портативной работы при низких скоростях потока. Эти насосы имеют широкий ассортимент исполнений из совместимых с пищевыми продуктами эластомерных материалов, включая сантопрен, ПТФЭ и переформованный EPDM/ПТФЭ.
Патентованный воздушный клапан, работающий без смазки
Переформованные ПТФЭ/EPDM-мембраны
SaniForce 1040 Diaphragm Pumps | |
| Maximum fluid working pressure | 8 bar, 0.8 MPa |
| Air pressure operating range | 1.4–8 bar, 0.14–0.8 MPa |
| Maximum air consumption | 1.4 m³/minute |
| Air consumption at 70 psi, 20 gpm | 1.2 m³/minute |
| Maximum free-flow delivery | 159 lpm |
| Maximum pump speed | 256 cpm |
| Gallons/liters per cycle* | 0.57 l |
| Maximum suction lift | 8.8 m wet, 4.9 m dry |
| Maximum size pumpable solids | 3.2 mm |
Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow | 92 dB(A) |
| Sound power level | 100 dB(A) |
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm | 73 dB(A) |
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings | |
| PTFE | 104°C |
| Santoprene® | 82°C |
| EPDM | 135°C |
| Polychloroprene | 93°C |
| Stainless Steel | 121°C |
Inlet/Outlet Sizes | |
| Air inlet size | 0.5 in npt(f) |
| Fluid inlet size | 1.5 in sanitary flange |
| Fluid outlet size | 1.5 in sanitary flange |
Wetted Parts*** | |
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. | |
| Wetted materials on all models | stainless steel |
| Wetted materials depending on model | EPDM, Polychloroprene, PTFE, Santoprene |
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts | 300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket) |
Weight | |
| FD1 Models | 24.9 kg |
| FA1 Models | 22.2 kg |
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1. *** The pump user must verify that the construction materials meet their specific application requirements. | |
