КаталогСистема разгрузки корзин SaniForce 3150 обеспечивает откачку вязких продуктов из оригинальных контейнеров 1135 л без разбавления материала. Стандартная комплектация системы разгрузки корзин включает надувное уплотнение пластины плунжера и обеспечивает быструю замену пустых контейнеров. Доступна полностью пневматическая версия для приложений, не требующих измерения или контроля партий, а также электронная версия для приложений, в которых требуется измерение и контроль.
Надувное грязесъемное уплотнение:
SaniForce Bin Evacuation Systems, BES3xx and BES4xx | |
| Maximum Working Fluid Pressure | 8.4 bar, 0.84 MPa |
| Compressed air requirement | 5.5–8.4 bar, 0.55–0.84 MPa |
| Fluid displacement (each pump) | 3.9 l/cycle |
| Flow rate @ 60 cpm | 454 lpm |
| Pressure ratio | 1:1 |
| Air consumption (each pump) | 0.006 m³/minute per lpm @ 4.8 bar, 0.48 MPa |
| Pump outlet | 3 in tri-clamp |
| Sound data | See your pump manual. |
| Wetted parts | 300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts. |
Pneumatic Control Panel | |
| Maximum input air pressure | 8.4 bar, 0.84 MPa |
| Maximum up/down ram pressure | 5.2 bar, 0.5 MPa |
| Air inlet — air controls | 3/4 in npt(f) |
| Air inlet — pump | 1/2 in npt(f) |
Electronic Control Panel | |
| Maximum input air pressure | 8.4 bar, 0.84 MPa |
| Maximum up/down ram pressure | 7 bar, 0.7 MPa |
| External power supply | 110 VA, 60 Hz, 15 amp maximum circuit breaker required |
SaniForce Bin Evacuation Systems, BESAxx, BESBxx, BESExx, and BESFxx | |
| Compressed air requirement | 5.5–7 bar, 0.55–0.7 MPa |
| Pump outlet | 2 in tri-clamp |
| Sound data | See your pump manual. |
| Wetted parts | 300 Series stainless steel, buna-N, and EPDM on the ram plate and seals. See your pump manual for additional wetted parts. |
Maximum Working Fluid Pressure | |
| BESAxx and BESBxx | 28.3 bar, 2.8 MPa |
| BESExx and BESFxx | 100.4 bar, 10.1 MPa |
Fluid displacement (each pump) | |
| BESAxx and BESBxx | 0.87 l/cycle |
| BESExx and BESFxx | 0.53 l/cycle |
Flow rate @ 60 cpm | |
| BESAxx | 104.5 lpm |
| BESBxx | 204.4 lpm |
| BESExx | 64.3 lpm |
| BESFxx | 128.7 lpm |
Pressure ratio | |
| BESAxx and BESBxx | 4.3:1 |
| BESExx and BESFxx | 10:1 |
Air consumption (each pump) | |
| BESAxx and BESBxx | 0.14 m³/minute per lpm @ 4.8 bar, 0.48 MPa |
| BESExx and BESFxx | 0.026 m³/minute per lpm @ 4.8 bar, 0.48 MPa |
Pneumatic Control Panel | |
| Maximum input air pressure | 7 bar, 0.7 MPa |
| Maximum up/down ram pressure | 5.2 bar, 0.5 MPa |
| Air inlet — air controls | 3/4 in npt(f) |
| Air inlet — pump | 1 in npt(f) |
Electronic Control Panel | |
| Maximum input air pressure | 7 bar, 0.7 MPa |
| Maximum up/down ram pressure | 7 bar, 0.7 MPa |
| External power supply | 110 VA, 60 Hz, 15 amp maximum circuit breaker required |
