КаталогСтандартная комплектация устройства разгрузки пищевых бочек SaniForce 2150 включает надувное уплотнение пластины плунжера, позволяет быстро осуществлять замену пустых контейнеров и обеспечивает откачку 99 % содержимого – без разбавления материала.
Грязесъемное уплотнение:
Sanitary Drum Unloaders | |
Maximum Working Fluid Pressure | |
| 5:1 Ratio Piston Pumps | 28.3 bar, 2.8 MPa |
| 6:1 Ratio Piston Pumps | 44.8 bar, 4.5 MPa |
| 12:1 Ratio Piston Pumps | 100.0 bar, 10 MPa |
| Diaphragm Pumps | 8.2 bar, 0.8 MPa |
Maximum Air Inlet Pressures | |
| Piston Pump Ram Packages | 6.9 bar, 0.7 MPa |
| Diaphragm Pump Ram Packages | 8.0 bar, 0.8 MPa |
| Ram | 6.9 bar, 0.7 MPa |
| 6:1 and 12:1 Ratio Piston Pumps | 6.9 bar, 0.7 MPa |
| 5:1 Ratio Piston Pumps | 5.5 bar, 0.6 MPa |
| Diaphragm Pumps | 8 bar, 0.8 MPa |
Air Inlet Size | |
| Enclosed Controls | 1/2 npt(f) |
| Exposed Controls | 3/4 npt(f) |
Maximum Ram Package Operating Temperature | |
| 5:1 Ratio Piston Pump Ram Packages | 60°C |
| All Other Ram Packages | 66°C |
Maximum/Minimum Drum Sizes | |
| Maximum Drum ID | 61 cm |
| Minimum Drum ID — straight sided | 49 cm |
| Minimum Drum ID — tapered` | 48 cm |
| Maximum Drum Height | 104 cm |
Wetted Parts | |
| Inflatable Seal | Neoprene |
| Ram (plate, fittings, gaskets) | 300–Series stainless steel, Buna-N, and polypropylene |
| 5:1 Ratio Piston Pumps (see pump manual) | Stainless steel, Buna-N, FKM, PTFE and UHMWPE. Priming piston pumps also have polychloroprene and nylon. Model 24F197 also has silicone. |
| 6:1 Ratio Piston Pumps (see pump manual) | Stainless steel, buna-N, polychloroprene, nitrile, nylon, and UHMWPE. Certain models have PTFE packings. |
| 12:1 Ratio Piston Pumps (see pump manual) | Stainless steel, acetal, nitrile, PTFE, UHMWPE |
| Diaphragm Pumps (see pump manual) | 316 stainless steel, Santoprene, Buna-N, fluoroelastomer, EPDM, weighted CR, weighted polychloroprene, and PTFE |
Noise Data | |
| All Models | See your pump manual. |
SaniForce 2150 Diaphragm Pumps | |
| Maximum fluid working pressure | 8 bar, 0.8 MPa |
| Air pressure operating range | 1.4–8 bar, 0.14–0.8 MPa |
| Maximum air consumption | 5 m³/minute |
| Air consumption at 70 psi, 50 gpm | 2.0 m³/minute |
| Maximum free-flow delivery | 568 lpm |
| Maximum pump speed | 165 cpm |
| Gallons/liters per cycle* | 3.7 l |
| Maximum suction lift | 8.8 m wet, 4.9 m dry |
| Maximum size pumpable solids | 6.3 mm |
Noise Data** | |
| Maximum Noise Level at 100 psi (7 bar, 0.7 MPa), full flow | 95 dB(A) |
| Sound power level | 102 dB(A) |
| Noise level at 70 psi (4.8 bar, 0.48 MPa), 50 cpm | 84 dB(A) |
Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings | |
| PTFE | 104°C |
| Santoprene® | 82°C |
| EPDM | 135°C |
| Polychloroprene | 93°C |
| Stainless Steel | 121°C |
Inlet/Outlet Sizes | |
| Air inlet size | 0.5 in npt(f) |
| Fluid inlet size | 2.5 in sanitary flange |
| Fluid outlet size | 2.5 in sanitary flange |
Wetted Parts*** | |
All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21, Section 177. | |
| Wetted materials on all models | 316 stainless steel |
| Wetted materials depending on model | EPDM, Polychloroprene, PTFE, Santoprene |
CAUTION: Santoprene may be used only with non-fatty, non-oily foods or alcohols up to 15% | |
| Non-wetted external parts | 300 series stainless steel, aluminum (A380), polyester (labels), LDPE foam (gasket) |
Weight | |
| FD2 Models | 66.7 kg |
| FA1 Models | 64 kg |
Santoprene® is a registered trademark of the Monsanto Co. Loctite® is a registered trademark of the Loctite Corporation. * Displacement per cycle may vary based on suction condition, discharge head, air pressure, and fluid type. ** Noise levels measured with the pump mounted to a solid surface. Sound power measured per ISO Standard 9614–1.*** The pump user must verify that the construction materials meet their specific application requirements. | |
