Подавители пульсации

Сокращение пульсации для однородной подачи материала и равномерного распыла
Сокращает техобслуживание и требуемое давление подпитки
Легкая промывка для упрощения и ускорения смены цветов
Удовлетворяет широким требованиям разных систем благодаря многим вариантам подключения подачи жидкости
Ограничение скачков давления в системе подачи жидкости

Вам необходимо смягчать перепады давления внутри системы? Подавители пульсаций Graco разработаны для решения ваших технологических потребностей.

Surge Tank Model 238986
Maximum Fluid Working Pressure	2.1 MPa, 21 bar
Maximum Gas Charge Pressure	2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)	76 lpm
Maximum Operating Temperature	50° C
Wetted Parts	304 &amp; 316 Stainless Steel, PTFE

Surge Tank Model 238987
Maximum Fluid Working Pressure	2.1 MPa, 21 bar
Maximum Gas Charge Pressure	2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)	76 lpm
Maximum Operating Temperature	50° C
Wetted Parts	304 &amp; 316 stainless steel, PTFE

Surge Tank Model 238988
Maximum Fluid Working Pressure	2.1 MPa, 21 bar
Maximum Gas Charge Pressure	2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)	76 lpm
Maximum Operating Temperature	50° C
Wetted Parts	304 &amp; 316 stainless steel, PTFE

Surge Tank Model 238987
Maximum Fluid Working Pressure	2.1 MPa, 21 bar
Maximum Gas Charge Pressure	2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)	76 lpm
Maximum Operating Temperature	50° C
Wetted Parts	304 &amp; 316 stainless steel, PTFE

Surge Tank Model 233736
Maximum Fluid Working Pressure	2.5 MPa, 25 bar
Maximum Air Inlet Pressure	1.5 MPa, 15 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)	Fluid does not flow through tank
Maximum Operating Temperature	80° C
Wetted Parts	Stainless steel, PTFE

Surge Tank Model 218509
Maximum Fluid Working Pressure	4.2 MPa, 42 bar
Maximum Gas Charge Pressure	4.2 MPa, 42 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)	76 lpm
Maximum Operating Temperature	50° C
Wetted Parts	Carbon steel, electroless nickel-plated steel, UHMW polyethylene, fluoroelastomer, PTFE

Surge Tank Model 238986