XM Plural-Component Sprayers |
| Mixed Ratio Range | 1:1-10:1 (in 0.1 increments) |
| Ratio Tolerance Range (before alarm) | +/- 5% |
| Minimum Flow Rate | 0.95 l/min |
| Maximum Flow Rate | 11.4 l/min |
| Fluid Viscosity Range | 200-20,000 cps (Heavier viscosities can be mixed using heat, circulation, and/or pressure feeding) |
| Fluid Filtration | 238 micron, standard on pump outlets (filter assembly not included on some models), Alternative 30 mesh screens included |
| Air Inlet | 3/4 npt(f) |
| Fluid inlets without feed kits | 1 1/4 npt(m) |
| 50:1 Maximum Fluid Working Pressure of mixed material | 35.8 MPa/358 bar |
| 70:1 Maximum Fluid Working Pressure of mixed material | 43.5 MPa/435 bar |
| Maximum Fluid Temperature | 71° C |
| Air Supply Pressure Range | 0.35-1.0 MPa/3.5-10.3 bar |
| 50:1 Maximum pump air set pressure | 0.70 MPa/7.0 bar |
| 70:1 Maximum pump air set pressure | 0.62 MPa/6.2 bar |
| Maximum pump inlet fluid feed pressure | 1.7 MPa/17 bar |
| Maximum Air Consumption | 1.96 cu m/min per lpm /at 0.7 MPa, 7.0 bar in cu m/min |
| Air Filtration | 40 micron main filter, 5 micron control air filter |
| Ambient Operating Temperature Range | 0 to 54° C |
| Ambient Storage Temperature Range | -1 to 71° C |
| Environmental Conditions Rating | Indoor/outdoor use, Altitude up to 4000 m, Maximum Relative humidity to 99% up to 54° C, Pollution Degree (11), Installation category (2) |
| Sound Pressure | 86 dBA at 0.7 MPa, 7 bar |
| Sound Power | 98 dBA at 0.7 MPa, 7 bar |
| Weight | Base sprayer (XM1A00 and XM5A00 models) 336.87 kg (add component weights to base sprayer weight for your specific model weight) |
|
| Suction Tubes | Aluminum |
| Flush Pump | Carbide, PTFE, stainless steel, UHMWPE |
| Hoses | Nylon |
| Pumps (A and B) | Carbon steel, alloy steel, 303, 440, 17-ph grades stainless steel, zinc and nickel plating, ductile iron, tungsten carbide, PTFE |
| Metering Valves | Carbon Steel, nickel plating, carbide, polyethylene, leather |
| Manifold | Carbon steel, nickel plating, carbide, 302 stainless steel, PTFE, UHMWPE |
| Mixer | Stainless steel housing with acetal elements |
Каталог
